生銹腐蝕問題?現象表現?

Symptoms of rusting and corrosion problems

濟南鐵藝護欄生銹腐蝕較為常見，尤其是在長期暴露于室外環境的情況下。生銹初期，鐵藝表面會出現一些細小的銹斑，隨著時間推移，銹斑逐漸擴大，甚至可能導致部分鐵藝部件出現銹穿、斷裂等嚴重情況。在濟南的一些老城區，部分居民小區的鐵藝護欄由于使用年限較長，生銹問題尤為突出，不僅影響了護欄的美觀，還降低了其防護性能。?

Rust and corrosion are common in Jinan wrought iron guardrails, especially when exposed to outdoor environments for a long time. In the early stage of rusting, small rust spots may appear on the surface of the iron piece. Over time, the rust spots gradually expand and may even cause serious problems such as rust penetration and fracture of some iron parts. In some old urban areas of Jinan, the rusting problem of wrought iron guardrails in some residential communities is particularly prominent due to their long service life, which not only affects the appearance of the guardrails but also reduces their protective performance. ?

原因分析?

Cause analysis

材質因素：部分鐵藝護欄在選材時，未選用優質鋼材。一些劣質鋼材本身含碳量過高，雜質較多，抗腐蝕性能較差。例如，在一些小型工程項目中，為降低成本，可能會采用價格低廉的普通鋼材制作鐵藝護欄，這類鋼材在濟南多變的氣候條件下，容易與空氣中的氧氣、水分發生化學反應，加速生銹腐蝕。?

Material factor: Some iron guardrails did not use high-quality steel when selecting materials. Some inferior steel materials themselves have high carbon content, more impurities, and poor corrosion resistance. For example, in some small-scale engineering projects, in order to reduce costs, low-priced ordinary steel may be used to make wrought iron guardrails. This type of steel is prone to chemical reactions with oxygen and moisture in the air under the changing climate conditions in Jinan, accelerating rusting and corrosion. ?

表面處理不當：鐵藝護欄的表面處理工藝對其防銹性能至關重要。常見的表面處理方式有鍍鋅、噴漆、烤漆等。若在鍍鋅過程中，鍍鋅層厚度不足，無法形成有效的保護膜，就難以抵御外界環境侵蝕。噴漆或烤漆工藝若操作不規范，如漆層厚度不均勻、底層處理不干凈等，也會導致鐵藝護欄在短時間內出現漆面脫落，進而使鋼材暴露生銹。在濟南某些施工現場，由于施工人員對表面處理工藝把控不到位，新安裝的鐵藝護欄在經過一個雨季之后，就開始出現生銹跡象。?

Improper surface treatment: The surface treatment process of wrought iron guardrails is crucial for their rust prevention performance. Common surface treatment methods include galvanizing, painting, baking paint, etc. If the thickness of the galvanized layer is insufficient during the galvanizing process to form an effective protective film, it will be difficult to resist external environmental erosion. If the painting or baking process is not standardized, such as uneven thickness of the paint layer, unclean bottom treatment, etc., it can also cause the paint surface of the wrought iron guardrail to peel off in a short period of time, thereby exposing the steel and rusting. At some construction sites in Jinan, due to inadequate control of surface treatment processes by construction personnel, newly installed wrought iron guardrails began to show signs of rusting after a rainy season. ?

環境因素：濟南屬于溫帶季風氣候，夏季高溫多雨，空氣濕度較大，這種潮濕的環境為鐵藝生銹創造了有利條件。此外，城市中的工業廢氣、汽車尾氣等污染物中含有酸性物質，與空氣中的水分結合形成酸雨，對鐵藝護欄具有較強的腐蝕性。例如，在濟南的一些工業區周邊，鐵藝護欄受到酸雨侵蝕的影響更為明顯，生銹速度比其他區域更快。

Environmental factors: Jinan belongs to a temperate monsoon climate, with high temperatures and heavy rainfall in summer, and high air humidity. This humid environment creates favorable conditions for rusting of wrought iron. In addition, industrial waste gas, automobile exhaust and other pollutants in cities contain acidic substances that combine with moisture in the air to form acid rain, which has strong corrosiveness to wrought iron guardrails. For example, in some industrial areas around Jinan, the impact of acid rain erosion on wrought iron guardrails is more pronounced, and the rusting rate is faster than in other areas.

結構松動問題?現象表現?

Phenomenon manifestation of structural looseness problem

鐵藝護欄結構松動表現為欄桿晃動、連接件松動甚至脫落等情況。在濟南的一些公園、廣場等地，人們在倚靠或觸碰鐵藝護欄時，能明顯感覺到欄桿晃動，存在較大安全隱患。部分小區的鐵藝大門，在長期使用后，門軸、合頁等連接件松動，導致大門開合不順暢，甚至無法正常關閉。

The looseness of the iron guardrail structure is manifested as shaking of the railing, loosening or even detachment of connecting components. In some parks, squares and other places in Jinan, people can clearly feel the shaking of the iron railings when leaning against or touching them, which poses a significant safety hazard. After long-term use, the iron gates in some residential areas have loose connections such as door shafts and hinges, resulting in unsmooth opening and closing of the gates, and even inability to close normally.

原因分析?

Cause analysis

安裝不規范：在鐵藝護欄安裝過程中，若施工人員未按照規范操作，就容易導致結構松動。例如，在固定立柱時，基礎澆筑深度不夠，或者使用的膨脹螺栓規格過小、數量不足，都無法為護欄提供穩固的支撐，隨著時間推移和外力作用，立柱容易出現晃動。在連接欄桿與立柱時，焊接不牢固，焊點過小或存在虛焊現象，也會使欄桿與立柱之間的連接強度降低，從而導致松動。在濟南某新建小區的驗收過程中，就發現部分鐵藝護欄存在立柱基礎不牢固的問題，需要重新返工加固。?

Improper installation: During the installation of wrought iron guardrails, if construction personnel do not follow the specifications, it is easy to cause structural looseness. For example, when fixing the column, if the foundation pouring depth is not sufficient, or if the expansion bolts used are too small in size or insufficient in quantity, they cannot provide stable support for the guardrail. Over time and under external forces, the column is prone to shaking. When connecting railings and columns, weak welding, small welding points, or virtual welding can also reduce the connection strength between railings and columns, leading to looseness. During the acceptance process of a newly built residential area in Jinan, it was discovered that some iron guardrails had unstable column foundations and needed to be reworked and reinforced. ?

日常維護缺失：鐵藝護欄在使用過程中，需要定期進行維護檢查。然而，很多場所對鐵藝護欄缺乏日常維護意識。連接件在長期使用過程中，受風吹日曬雨淋等自然因素影響，會出現生銹、變形等情況，若不及時進行緊固或更換，就會導致松動。此外，鐵藝護欄可能會遭受人為碰撞，如車輛刮擦、重物撞擊等，若受損后未及時修復，也會使結構松動問題加劇。在濟南的一些道路兩側，由于部分車輛靠邊停車時不小心刮擦到路邊的鐵藝護欄，導致欄桿變形、連接件松動，但長期未得到修復，安全隱患日益增大。?

Lack of daily maintenance: Iron guardrails require regular maintenance and inspection during use. However, many places lack daily maintenance awareness for wrought iron guardrails. During long-term use, connectors may rust and deform due to natural factors such as wind, sun, and rain. If not tightened or replaced in a timely manner, they may become loose. In addition, wrought iron guardrails may be subject to human collisions, such as vehicle scratches, heavy object impacts, etc. If damaged and not repaired in a timely manner, it can also exacerbate the problem of structural looseness. On both sides of some roads in Jinan, due to some vehicles accidentally scratching the iron guardrails on the roadside when parking, the guardrails have been deformed and the connecting parts have become loose, but they have not been repaired for a long time, and the safety hazards are increasing day by day. ?

設計不合理：部分鐵藝護欄在設計階段，未充分考慮實際使用中的受力情況和環境因素，導致結構設計不合理。例如，欄桿間距過大，在人員倚靠時，欄桿承受的壓力過于集中，容易使連接件松動。在一些風力較大的區域，若鐵藝護欄的抗風設計不足，長期受強風作用，也會導致結構松動。在濟南的一些高層住宅陽臺鐵藝護欄設計中，若未考慮到高層建筑風荷載較大的特點，就可能出現護欄在大風天氣下晃動加劇的情況。

Unreasonable design: Some wrought iron guardrails did not fully consider the actual stress conditions and environmental factors during the design phase, resulting in an unreasonable structural design. For example, if the spacing between railings is too large, the pressure on the railings will be too concentrated when personnel lean against them, which can easily cause the connecting components to loosen. In some areas with strong winds, if the wind resistance design of wrought iron guardrails is insufficient, long-term exposure to strong winds can also lead to structural looseness. In the design of iron railings for balconies in some high-rise residential buildings in Jinan, if the characteristics of high wind loads in high-rise buildings are not taken into account, it may lead to increased shaking of the railings in windy weather.

本文由濟南鐵藝護欄友情奉獻.更多有關的知識請點擊:http://www.longepay.com我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

This article is dedicated to friendship For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message